Anthropometric Measurements · Experience 10

Upper Arm Length VR Nursing Simulation

The learner flexes the virtual patient's elbow to 90°, palpates the acromion and the tip of the olecranon and measures the distance between them.

Upper Arm Length VR Nursing Simulation
Under constructionAnthropometric MeasurementsExperience 10 of 17
This scenario is under construction. The scenarios below describe the training content that is being finalised. Contact Enmatech Oman for the expected release date or a preview.

Learning objectives

By the end of this experience the learner can:

  • Locate the anatomical landmarks for upper arm length: from the acromion process to the olecranon process with the elbow flexed at 90°.
  • Use the sliding caliper correctly and read it to the required precision.
  • Position the patient correctly and repeat the measurement to confirm consistency.
  • Record the value with the side measured and compare it with reference ranges.
Upper Arm Length VR Nursing Simulation

Procedure steps

  1. Explain the measurement to the virtual patient and position them as required.
  2. Palpate and mark the landmarks (from the acromion process to the olecranon process with the elbow flexed at 90°).
  3. Apply the sliding caliper as demonstrated and take the reading.
  4. Repeat the measurement; if the two readings differ beyond the tolerance, take a third.
  5. Record the mean value and the instrument used.

Assessment

Landmark accuracy, instrument placement and the difference between the learner's reading and the reference value are checked automatically, with a tolerance set by the instructor.

Equipment and setting

Instrument: sliding caliper. Landmarks: from the acromion process to the olecranon process with the elbow flexed at 90°.

Frequently asked

Upper Arm Length FAQ

What educators ask about this scenario.

What will I practise in the Upper Arm Length scenario?

The learner flexes the virtual patient's elbow to 90°, palpates the acromion and the tip of the olecranon and measures the distance between them.

How is performance assessed?

Landmark accuracy, instrument placement and the difference between the learner's reading and the reference value are checked automatically, with a tolerance set by the instructor.

Discuss your medical VR training requirements with Enmatech Oman

  • Create virtual reality and augmented reality experiences at the best prices
  • Equipping engineering laboratories with the best equipment
  • Virtual tours with 360° technology that you can view through just one link