Anthropometric Measurements · Experience 01

Upper Leg Length VR Nursing Simulation

The learner positions the seated virtual patient, locates the inguinal crease and the top of the patella, and measures upper leg length with an anthropometer while keeping the instrument parallel to the femur.

Upper Leg Length VR Nursing Simulation
Under constructionAnthropometric MeasurementsExperience 1 of 17
This scenario is under construction. The scenarios below describe the training content that is being finalised. Contact Enmatech Oman for the expected release date or a preview.

Learning objectives

By the end of this experience the learner can:

  • Locate the anatomical landmarks for upper leg length: from the inguinal crease to the proximal border of the patella with the knee flexed at 90°.
  • Use the sliding caliper / anthropometer correctly and read it to the required precision.
  • Position the patient correctly and repeat the measurement to confirm consistency.
  • Record the value with the side measured and compare it with reference ranges.
Upper Leg Length VR Nursing Simulation

Procedure steps

  1. Explain the measurement to the virtual patient and position them as required.
  2. Palpate and mark the landmarks (from the inguinal crease to the proximal border of the patella with the knee flexed at 90°).
  3. Apply the sliding caliper / anthropometer as demonstrated and take the reading.
  4. Repeat the measurement; if the two readings differ beyond the tolerance, take a third.
  5. Record the mean value and the instrument used.

Assessment

Landmark accuracy, instrument placement and the difference between the learner's reading and the reference value are checked automatically, with a tolerance set by the instructor.

Equipment and setting

Instrument: sliding caliper / anthropometer. Landmarks: from the inguinal crease to the proximal border of the patella with the knee flexed at 90°.

Frequently asked

Upper Leg Length FAQ

What educators ask about this scenario.

What will I practise in the Upper Leg Length scenario?

The learner positions the seated virtual patient, locates the inguinal crease and the top of the patella, and measures upper leg length with an anthropometer while keeping the instrument parallel to the femur.

How is performance assessed?

Landmark accuracy, instrument placement and the difference between the learner's reading and the reference value are checked automatically, with a tolerance set by the instructor.

Discuss your medical VR training requirements with Enmatech Oman

  • Create virtual reality and augmented reality experiences at the best prices
  • Equipping engineering laboratories with the best equipment
  • Virtual tours with 360° technology that you can view through just one link